# RTL-TCP

RTL-TCP is a network server that streams RTL-SDR USB dongle data over TCP/IP, allowing SDR applications on remote machines to receive radio signals through the dongle connected to the host. It is open source and self-hosted, installable on Docker Hub and Unraid.

Canonical page: https://ourlocalhost.com/app/1517/rtl-tcp

## Description

RTL-TCP is a network server that streams RTL-SDR USB dongle data over TCP/IP, allowing SDR applications on remote machines to receive radio signals through the dongle connected to the host.

## Platform availability

Available on 1 of 10 platforms: Unraid.

## Health score

14/100 (Low), based on 3 of 4 factors.
- Maintained: 1 (last commit 720 days ago)
- Popular: 17 (6 GitHub stars)
- Easy to install: 35 (1 install platform, install notes, Docker image)

## Links

- GitHub: https://github.com/Cossey/docker
- Docker Hub: https://hub.docker.com/r/kosdk/rtl-tcp
- Unraid: https://ca.unraid.net/apps/rtl-tcp-12qtrq20y8r3am?q=RTL-TCP

## Common questions

### Does streaming an RTL-SDR over the network require opening a port?

Yes, network access requires opening a port or using a VPN.

### Can rtl_tcp directly stream from an SDRPlay?

No, rtl_tcp cannot directly work with SDRPlay. RSP_TCP can act as a replacement with fewer controls, while SDRconnect is mentioned as a future option for full control.

### Why might rtl_tcp fail to start as a Raspberry Pi service with a customized user?

A customized username can cause the service to fail. The user fixed it by correcting the WorkingDirectory setting in the service configuration.

### How do I select which RTL-SDR stick to use when several are connected?

Use the serial option to select the correct stick by its serial number. Picking the wrong device can make the app record from the wrong stick.

### What should I set on the dongle before starting rtl_tcp?

Set the center frequency, sample rate, and gain to match the desired signal before listening. Otherwise the dongle may tune to the wrong frequency or produce a signal that is too quiet or too loud.

### Is there an iOS app for connecting to rtl_tcp servers?

Yes, CoronaSDR is a free native iOS client for receiving from rtl_tcp servers.

---
Source: Our Local Host (https://ourlocalhost.com/app/1517/rtl-tcp), the self-hosted and open-source app directory.
