# HBAviewer

HBAviewer is an Unraid plugin that monitors LSI / Broadcom SAS host bus adapters (HBAs) across four controller generations — SAS2 (9200 family, via the bundled lsiutil) and SAS3 / SAS3.5 tri-mode (9300 / 9400 families,. It is open source and self-hosted, installable on Unraid.

Canonical page: https://ourlocalhost.com/app/4154/hbaviewer

## Description

HBAviewer is an Unraid plugin that monitors LSI / Broadcom SAS host bus adapters (HBAs) across four controller generations — SAS2 (9200 family, via the bundled lsiutil) and SAS3 / SAS3.5 tri-mode (9300 / 9400 families, via the system storcli) — with the backend auto-detected per card and multiple controllers shown side by side. It shows per-controller temperature with a health rollup, PHY link/speed/error counters, attached drives (enclosure/slot, model, serial, state, SAS address), per-drive and background SMART, a firmware event log archived to /boot, an enclosure/topology summary, real-time performance graphs, a dashboard tile (Unraid 7.2+), and an opt-in firmware/BIOS update tab. SAS and SATA drives are supported; storcli is required for SAS3/SAS3.5 cards. Inspired by DevlinDelFuego's Unraid-LSIUtil; lsiutil by Thomas Lovell.

## Platform availability

Available on 1 of 10 platforms: Unraid.

## Health score

51/100 (Fair), based on 3 of 4 factors.
- Maintained: 85 (last commit 62 days ago)
- Popular: 18 (7 GitHub stars)
- Easy to install: 25 (1 install platform, install notes)

## Links

- Unraid: https://ca.unraid.net/apps/hbaviewer-0q78pli0nxqfg2?q=HBAviewer
- GitHub: https://github.com/FuggingOld/Unraid-HBAviewer

## Common questions

### What should I do if HBAviewer warns that a card was found without the tool it needs?

Install the missing access tool first, then confirm the detected Access Method says StorCLI2, storcli, or lsiutil as expected before opening the Monitor.

### Where does HBAviewer archive the firmware event log?

It archives the firmware event log to /boot.

### Is firmware or BIOS updating automatic in HBAviewer?

Updating is opt-in via a firmware/BIOS update tab.

### Can HBAviewer show multiple HBA controllers at once?

It shows multiple controllers side by side, with the backend auto-detected per card.

---
Source: Our Local Host (https://ourlocalhost.com/app/4154/hbaviewer), the self-hosted and open-source app directory.
