# Zynq-xz702-ubuntu-python

Zynq-xz702-ubuntu-python is a self-hosted development app. A balena base container image for the Xilinx Zynq ZC702 board, preloaded with Ubuntu Linux and Python for building and running containerized IoT applications on that hardware. It is open source and self-hosted, installable on Docker Hub.

Canonical page: https://ourlocalhost.com/app/6596/zynq-xz702-ubuntu-python

## Description

A balena base container image for the Xilinx Zynq ZC702 board, preloaded with Ubuntu Linux and Python for building and running containerized IoT applications on that hardware.

## Platform availability

Available on 0 of 10 platforms.

## Health score

31/100 (Low), based on 2 of 4 factors.
- Easy to install: 10 (0 install platforms, Docker image)
- Light to run: 60 (2 GB minimum RAM, runs on ARM)

## Links

- Docker Hub: https://hub.docker.com/r/balenalib/zynq-xz702-ubuntu-python

## Common questions

### How do I troubleshoot connectivity when a Python container cannot reach the ZC702 board?

Check that the board is powered on, shown by the red LD13 LED, and that the bitstream has loaded, shown by the green DONE LD12 LED. The host and board must be on the same network or connected directly.

### Can Ubuntu Desktop be installed on PetaLinux for the Zynq-7000 AP SoC?

Yes, a guide provides instructions for installing Ubuntu Desktop on PetaLinux for the Zynq-7000 AP SoC. It also demonstrates its features.

### Which ZC702 peripherals are relevant when porting PYNQ to the board?

A community post describes porting PYNQ to the ZC702 development board. The board includes HDMI, CAN bus, UART, Ethernet, SD card, USB host, and I2C peripherals.

### Can an image-processing pipeline be run on the ZC702 using Python and PYNQ?

A basic image-processing pipeline can be built on a ZC702 board using xOpenCV and PYNQ. The example uses a generic USB camera.

---
Source: Our Local Host (https://ourlocalhost.com/app/6596/zynq-xz702-ubuntu-python), the self-hosted and open-source app directory.
