OrcaSlicer noVNC
OrcaSlicer noVNC is a Docker container that runs the OrcaSlicer FDM 3D-printing slicer in a web browser via noVNC, letting homelab users slice G-code files…
Platform availability
Available on 4 of 10 platforms
Health score?A 0-100 score computed nightly from four factors: maintained (40%: recent commits and steady activity), popular (25%: GitHub stars, log scale), easy to install (20%: platforms, install notes, setup guides, Docker image) and light to run (15%: minimum RAM, ARM support). When the source code has been checked, a fifth factor, security check (20%: automated scan for committed secrets, unsafe desktop-app settings, known-vulnerable dependencies and project hygiene; any serious finding caps it at 20), is added. Factors without data are left out and the rest are rescaled.
78/100 Good
- Maintained
- 100last commit 10 days ago
- Popular
- 8416,429 GitHub stars
- Easy to install
- 654 install platforms, install notes, Docker image
- Light to run
- 304 GB minimum RAM
Availability: platform listings confirmed today, links checked 33 days ago
- GitHub stars
- 16,429
- Open issues
- 2853
- Last commit
- 2026-11-11
- Latest release
- v2.5.0
- License
- AGPL-3.0
- Activity
- declining
Checked 10 days ago - source: GitHub (SoftFever/OrcaSlicer)
Resources & Compatibility
Minimum requirements: 4 GB RAM. ARM (e.g. Raspberry Pi) is not supported.
Checked 54 days ago - source: Docker Hub image tags and published docs
First-install notes
- Fill in PUID/PGID and config folder Before starting, set PUID and PGID to your user and group IDs (the IDs the container uses), set TZ, and map /path/to/config to a local folder for settings. If these are missing or wrong, the app may create files you can't read or lose its configuration. source
- Start the container and open port 3001 Run docker-compose up -d, then open https://localhost:3001/ in a browser. If you're on a different computer, use your server's IP or domain instead of localhost; otherwise the web interface won't load. source
- Use official Nvidia driver for GPU support If you want GPU acceleration, install the official Nvidia driver, configure Docker's Nvidia runtime, and check nvidia-smi works. Without this setup, the container cannot use your GPU and GPU-dependent features may fail or run slowly. source
Fetched 39 days ago - each note links to its source
Variants
Alternatives (7)
- Bambu Studio - Bambu Studio is Bambu Lab's official, open-source slicing software that converts 3D models into print-ready G-code.
- Creality Print - Creality Print is a self-developed Fused deposition modeling slicing software produced by Creality.
- Cura - Cura is a free 3D printing slicer that prepares your models for the printer and fine-tunes printing with over 400 configurable settings, gi…
- QIDI Studio - QIDIStudio is a professional 3D printer slicing software,which is perfectly compatible with all printers and 3D printing filaments of QIDI…
- bambuddy - A powerful, self-hosted print archive and management system for Bambu Lab 3D printers.
- prusaslicer - PrusaSlicer is a self-hosted, browser-accessible build of the Prusa Research 3D-printing slicer, streamed over the web through Selkies (Web…
- superslicer-novnc
Checked 40 days ago - source: AlternativeTo
Common questions
Can OrcaSlicer in this container connect to network printers?
Yes, OrcaSlicer includes network printer support with Klipper, PrusaLink, and OctoPrint for remote control.
What should I try if OrcaSlicer connection or export problems occur?
Switching to LAN mode or checking filament and build plate settings often fixes connection and export problems.
Where can I find community-shared tree support settings for OrcaSlicer?
A Reddit thread shares tree support settings a user has used and includes community comments.
Answers sourced from github.com, www.facebook.com, www.reddit.com
Community
Collected 53 days ago - public community threads