Hikvision-unifi-fire-bridge

Bridges a Hikvision thermal camera's fire and Temperature-Measurement-Alarm (TMA) events into a UniFi Protect Alarm Manager webhook - a camera fire alarm can…

  • Communication
  • Home Automation
  • Security
  • Tools & Utilities
Bridges a Hikvision thermal camera's fire and Temperature-Measurement-Alarm (TMA) events into a UniFi Protect Alarm Manager webhook - a camera fire alarm can ring a Protect siren, send a priority push, or drive any Alarm Manager action. Fail-loud by design: re-alerts every 60s while the fire stays active, proactively probes the Protect path so a broken webhook surfaces before a fire, and enforces strict TLS. NOT certified life-safety equipment: not a substitute for compliant smoke alarms, fire panels, or emergency procedures, and carries no safety certification. Use only in addition to properly certified fire detection, at your own risk.

Platform availability

Available on 1 of 10 platforms

  • Unraid
  • TrueNAS (not listed)
  • Umbrel (not listed)
  • ZimaOS (not listed)
  • Proxmox (not listed)
  • Helm (not listed)
  • Mac (not listed)
  • Windows (not listed)
  • Linux (not listed)
  • Any server (not listed)

Health score?A 0-100 score computed nightly from four factors: maintained (40%: recent commits and steady activity), popular (25%: GitHub stars, log scale), easy to install (20%: platforms, install notes, setup guides, Docker image) and light to run (15%: minimum RAM, ARM support). When the source code has been checked, a fifth factor, security check (20%: automated scan for committed secrets, unsafe desktop-app settings, known-vulnerable dependencies and project hygiene; any serious finding caps it at 20), is added. Factors without data are left out and the rest are rescaled.

44/100 Fair

Maintained
70last commit 77 days ago
Popular
102 GitHub stars
Easy to install
351 install platform, install notes, Docker image
Light to run
No data

Based on 3 of 4 factors.

Availability: platform listings confirmed today, links checked 21 days ago

GitHub stars
2
Open issues
0
Last commit
2026-09-05
License
AGPL-3.0
Activity
stale

Checked 7 days ago - source: GitHub (Pacman-Clyde/hikvision-unifi-fire-bridge)

Resources & Compatibility

Requirements not published yet.

Checked 54 days ago - source: Docker Hub image tags and published docs

First-install notes

  • Enter the Hikvision host and keys Before starting, fill in your Hikvision platform’s IP address or hostname with its port, plus the appKey and appSecret (the API username and password-like credentials). These tell the bridge where the system is and let it authenticate; wrong values will stop camera and fire alerts. source
  • Match the HTTP/HTTPS setting Set the Hikvision address to use HTTP or HTTPS exactly as your platform is configured. If the protocol is wrong, the bridge can’t reach the API even with the right keys. source
  • Treat the Hikvision keys like passwords Keep the appKey and appSecret in the bridge settings and don’t share them. They allow the bridge to access your cameras and events, so leaking them can expose your system to others. source

Fetched 47 days ago - each note links to its source

Alternatives

No alternatives collected yet.

Common questions

What Hikvision platform settings must be configured for the bridge to connect?

Enter the Hikvision platform's IP address or hostname with its port, plus the appKey and appSecret, and match the HTTP/HTTPS setting exactly. Wrong values or a wrong protocol will stop camera and fire alerts.

What can the UniFi Protect webhook do when a fire-detection event occurs?

It triggers a UniFi Protect Alarm Manager incoming webhook, which can ring a Protect siren or send a priority push notification.

How does the bridge behave while a fire condition remains active?

It re-alerts every 60 seconds while the fire stays active and proactively probes the Protect path so a broken webhook surfaces before a fire.

Can this bridge replace certified fire detection?

No, it is not certified life-safety equipment and is not a substitute for compliant smoke alarms, fire panels, or emergency procedures. Use it only in addition to properly certified fire detection.

Answers sourced from github.com, open.hikvision.com

Community

Collected 49 days ago - public community threads