HBAviewer

HBAviewer is an Unraid plugin that monitors LSI / Broadcom SAS host bus adapters (HBAs) across four controller generations — SAS2 (9200 family, via the…

  • Infrastructure
  • Plugins
  • Tools & Utilities
HBAviewer is an Unraid plugin that monitors LSI / Broadcom SAS host bus adapters (HBAs) across four controller generations — SAS2 (9200 family, via the bundled lsiutil) and SAS3 / SAS3.5 tri-mode (9300 / 9400 families, via the system storcli) — with the backend auto-detected per card and multiple controllers shown side by side. It shows per-controller temperature with a health rollup, PHY link/speed/error counters, attached drives (enclosure/slot, model, serial, state, SAS address), per-drive and background SMART, a firmware event log archived to /boot, an enclosure/topology summary, real-time performance graphs, a dashboard tile (Unraid 7.2+), and an opt-in firmware/BIOS update tab. SAS and SATA drives are supported; storcli is required for SAS3/SAS3.5 cards. Inspired by DevlinDelFuego's Unraid-LSIUtil; lsiutil by Thomas Lovell.

Platform availability

Available on 1 of 10 platforms

  • Unraid
  • TrueNAS (not listed)
  • Umbrel (not listed)
  • ZimaOS (not listed)
  • Proxmox (not listed)
  • Helm (not listed)
  • Mac (not listed)
  • Windows (not listed)
  • Linux (not listed)
  • Any server (not listed)

Health score?A 0-100 score computed nightly from four factors: maintained (40%: recent commits and steady activity), popular (25%: GitHub stars, log scale), easy to install (20%: platforms, install notes, setup guides, Docker image) and light to run (15%: minimum RAM, ARM support). When the source code has been checked, a fifth factor, security check (20%: automated scan for committed secrets, unsafe desktop-app settings, known-vulnerable dependencies and project hygiene; any serious finding caps it at 20), is added. Factors without data are left out and the rest are rescaled.

51/100 Fair

Maintained
85last commit 62 days ago
Popular
187 GitHub stars
Easy to install
251 install platform, install notes
Light to run
No data

Based on 3 of 4 factors.

Availability: platform listings confirmed today, links checked 4 days ago

GitHub stars
7
Open issues
5
Last commit
2026-09-19
Latest release
2026.09.19
License
MIT
Activity
stale

Checked 5 days ago - source: GitHub (FugginOld/Unraid-HBAviewer)

Resources & Compatibility

Requirements not published yet.

First-install notes

  • Installation & backend requirements Install from the Unraid Community Applications (Applications tab). A backend is auto-detected per controller: SAS2 (9200 family) cards use the bundled lsiutil, while SAS3/SAS3.5 (9300/9400) tri-mode cards use the system storcli, which is required for those families. source
  • Install and controller backends Install HBAviewer from the Unraid Community Applications (CA) app store. SAS2 (9200 family) controllers are driven by the bundled lsiutil, while SAS3 and SAS3.5 tri-mode (9300/9400) controllers depend on the system storcli already installed for those cards. source

Fetched today - each note links to its source

Alternatives

No alternatives collected yet.

Common questions

What should I do if HBAviewer warns that a card was found without the tool it needs?

Install the missing access tool first, then confirm the detected Access Method says StorCLI2, storcli, or lsiutil as expected before opening the Monitor.

Where does HBAviewer archive the firmware event log?

It archives the firmware event log to /boot.

Is firmware or BIOS updating automatic in HBAviewer?

Updating is opt-in via a firmware/BIOS update tab.

Can HBAviewer show multiple HBA controllers at once?

It shows multiple controllers side by side, with the backend auto-detected per card.

Answers sourced from github.com, github.com

Community

Collected 48 days ago - public community threads