Fr24feed-piaware
Fr24feed-Piaware is an all-in-one Docker image that bundles PiAware, fr24feed, and dump1090 to receive ADS-B and MLAT flight data from an RTL-SDR dongle and…
Platform availability
Available on 1 of 10 platforms
- Unraid
- TrueNAS (not listed)
- Umbrel (not listed)
- ZimaOS (not listed)
- Proxmox (not listed)
- Helm (not listed)
- Mac (not listed)
- Windows (not listed)
- Linux (not listed)
- Any server (not listed)
Health score?A 0-100 score computed nightly from four factors: maintained (40%: recent commits and steady activity), popular (25%: GitHub stars, log scale), easy to install (20%: platforms, install notes, setup guides, Docker image) and light to run (15%: minimum RAM, ARM support). When the source code has been checked, a fifth factor, security check (20%: automated scan for committed secrets, unsafe desktop-app settings, known-vulnerable dependencies and project hygiene; any serious finding caps it at 20), is added. Factors without data are left out and the rest are rescaled.
63/100 Good
- Maintained
- 75last commit 45 days ago
- Popular
- 50307 GitHub stars
- Easy to install
- 351 install platform, install notes, Docker image
- Light to run
- No data
- Security check
- 85no serious findings, CI
Based on 4 of 5 factors.
Availability: platform listings confirmed today, links checked 52 days ago
- GitHub stars
- 307
- Open issues
- 3
- Last commit
- 2026-10-07
- Latest release
- 2.9.0
- License
- MIT
- Activity
- stale
Checked 20 days ago - source: GitHub (Thom-x/docker-fr24feed-piaware-dump1090-mutability)
Resources & Compatibility
ARM (e.g. Raspberry Pi) is supported.
Checked 54 days ago - source: Docker Hub image tags and published docs
First-install notes
- Requirements Requires Docker and an RTL-SDR DVBT USB dongle with an RTL2832 chip to receive the ADS-B signal before the feeds can be generated. source
- Verify the feeds After the container starts, check the container log to confirm the RTL-SDR dongle is in use and both feeds are working, then open the WebUI to view the aircraft map. source
Fetched 37 days ago - each note links to its source
Variants
Alternatives
No alternatives collected yet.
Common questions
Which ports should I expose for the local map and FR24 feeder configuration?
Expose port 8080 for the received-data map and port 8754 for the FR24 Feeder configuration panel. Use your Docker host address with those ports to reach them.
How do I give the container access to my RTL-SDR USB dongle?
Pass the USB bus with the device flag shown in the Docker example. The README lists an RTL-SDR DVBT USB dongle, such as RTL2832, as a requirement.
What credentials should I configure for FlightRadar24 and FlightAware?
Set the FR24FEED_FR24KEY environment variable for your FlightRadar24 sharing key and PIAWARE_FEEDER_DASH_ID for your FlightAware feeder ID. Optional services can also be enabled with their SERVICE_ENABLE variable and associated credentials.
How can I reduce writes to an SD card or HDD?
Add the tmpfs mounts shown in the Docker run example for /run, /planefinder/log, and /usr/lib/fr24/public_html/data. The README says this avoids writing data to the HDD or SD card.
Is there a time synchronization gotcha for MLAT?
Mount the host time file with -v /etc/localtime:/etc/localtime:ro. The README says this is needed for MLAT or you may have time synchronization issues.
How do I disable a service that starts automatically?
Set the relevant SERVICE_ENABLE environment variable to false. For example, SERVICE_ENABLE_DUMP1090=false disables the dump1090 service.
Answers sourced from github.com
Community
- Trying to setup FR24Feed + PiAware : r/ADSB - Reddit (reddit)
- Installing Flightradar24 feed on a PiAware install. : r/ADSB - Reddit (reddit)
- Step by step guide to feeding FR24+FA - Flightradar24 Forum (forum)
- FR24 install from PiAware fails - FlightAware Discussions (forum)
- FR24+Piaware feeding - Flightradar24 Forum (forum)
- discussions.flightaware.com (forum)
Collected 53 days ago - public community threads